To modify the settings in Shinobi, you have to click on the small wrench icon on the respective camera screen. The following settings are proven to work and should not be changed without good reason.
The settings for the small JideTech camera are:
Identity
Mode: Watch Only
Connection
Input Type: H.264/H.265/H.265+
Automatic: No
Connection Type: RTSP
RTSP Transport: TCP
Username: admin
Password: admin
Host: 192.168.10.253 [the camera's current IP address]
Port: 554
Path: /1/h264major [for high quality stream] or /1/h264minor [for low quality stream]
Stream
Stream Type: Base64 over Websocket
The settings for the big Floureon PTZ cameras are:
Identity
Mode: Watch Only
Connection
Input Type: H.264/H.265/H.265+
Automatic: No
Connection Type: RTSP
RTSP Transport: TCP
Username: admin
Password: admin
Host: 192.168.10.251 or 192.168.10.252 [depending on the camera]
Port: 554
Path: /1 [for high quality stream]; /2 [for medium quality stream]; /3 [for low quality stream]
Stream
Stream Type: Base64 over Websocket
Controls
Controllable: Yes
Custom Base URL: rtsp://192.168.10.251:8080 or rtsp://192.168.10.252:8080 [depending on the camera]
Call Method: ONVIF
Stop Command: Yes